82(0)10.6760.3138
Mon-Fri/am10:00~pm19:00 Lunch/pm12:00~pm13:00
Sat/Sun/Holiday off
Woori 1005-002-313563 Merman
Woori 171-114302-02-201 Lim Jung Taek
|
|
머맨 노즈클립 N1 사용 매뉴얼
Merman Noseclip N1 User Manual
제품 소개
머맨 노즈클립 N1은 프리다이빙 시 손을 사용하지 않고 코를 막아주는 도구로, 효율적인 호흡 제어와 몰입을 돕는 전문 장비입니다.
N1은 시중의 다른 노즈클립보다 더 강력한 압력으로 코를 눌러주며, 피부 자극은 최소화되도록 설계되었습니다. 특히, 소재와 구조의 결합을 통해 편안하면서도 강력한 밀착력을 제공합니다.
주요 특징
-
압력 조절 가능: 하단의 톱니형 바(Bar)를 이용해 단계적으로 코를 누르는 힘을 조절할 수 있습니다.
-
편리한 탈착 방식: 착용 상태에서 검지와 중지로 본체를 잡고, 엄지로 바 끝부분을 밀어주면 쉽게 해제할 수 있습니다.
사용 환경 및 팁
-
초급~중급 프리다이버: 스태틱(Static), 다이나믹(Dynamic), MDR 등 다양한 상황에서 사용 가능하며, 코를 막는 압력을 상황에 따라 적절히 조절하면 더 편안한 릴렉스 상태를 유지할 수 있습니다.
-
고급 프리다이버: 깊은 수심 트레이닝이나 경기 시에는 코를 강하게 밀착하여 사용합니다. 강한 착용으로 인해 통증이 발생할 경우, 아래와 같이 패드 커스터마이징을 통해 압력을 조절할 수 있습니다.
패드 커스터마이징 가이드
-
기존에 부착된 패드를 제거합니다.
-
3mm 또는 5mm 네오프렌 소재를 패드 형태로 잘라 준비합니다. (마찰력 유지를 위해 나일론 원단이 부착된 소재 사용 권장)
-
잘라낸 네오프렌을 노란 본드(돼지본드, 오공본드 등)를 사용해 본체에 부착합니다.
-
네오프렌은 사용감에 따라 빠르게 눌려 성능이 저하되므로 자주 교체해 주세요.
착용 각도 팁
머맨 노즈클립은 프리다이버의 자세에 따른 저항 최소화를 고려하여 설계되었습니다.
착용 시 각도를 신중히 조절하면 물 속에서의 저항을 줄이고 경기력 향상에 도움이 됩니다.
유지 및 관리 방법
-
사용 후 반드시 수돗물로 세척하고, 그늘에서 완전히 건조시켜 보관합니다.
-
해제 시에는 앞서 설명한 손가락 3개(검지·중지·엄지)를 사용하여 부드럽게 탈착해 주세요.
(강제로 잡아당기면 코에 상처가 나고 패드가 마모됩니다.)
주의사항
-
직사광선에 장시간 노출하지 마세요.
-
바닷물 사용 후 반드시 깨끗이 헹구세요.
-
습기가 남은 상태로 보관하지 마세요.
-
무리한 힘을 가하지 마세요.
-
제품은 견고하게 제작되었지만, 사용법과 관리법에 따라 손상될 수 있습니다.
환경을 위한 약속
머맨 노즈클립은 불필요한 포장을 생략하여, 꼭 필요한 프리다이버에게만 제공되길 바랍니다. 무분별한 소비를 지양합니다.
Merman Noseclip N1 User Manual
Product Overview
The Merman Noseclip N1 is a specialized piece of equipment for freedivers that securely blocks the nostrils, allowing for efficient hands-free diving.
Compared to other noseclips on the market, the N1 provides stronger pressure while minimizing discomfort thanks to its carefully selected materials and ergonomic design.
Key Features
-
Adjustable Pressure: The pressure on the nose can be fine-tuned using the notched adjustment bar at the bottom of the product.
-
Easy to Remove: To remove, simply hold the clip with your index and middle fingers and gently push the end of the bar with your thumb.
Adjustable Pressure: The pressure on the nose can be fine-tuned using the notched adjustment bar at the bottom of the product.
Easy to Remove: To remove, simply hold the clip with your index and middle fingers and gently push the end of the bar with your thumb.
Recommended Usage
-
For Beginner and Intermediate Freedivers:
Suitable for static, dynamic, and MDR (Mammalian Dive Reflex) training. Adjust the pressure to match your needs and maintain a relaxed state to avoid discomfort.
-
For Advanced Freedivers:
Use for deep diving training and competition. Apply the clip firmly to prevent air leakage during Frenzel or mouthfill techniques.
If the pressure causes discomfort, you can customize the pad for better comfort (instructions below).
For Beginner and Intermediate Freedivers:
Suitable for static, dynamic, and MDR (Mammalian Dive Reflex) training. Adjust the pressure to match your needs and maintain a relaxed state to avoid discomfort.
For Advanced Freedivers:
Use for deep diving training and competition. Apply the clip firmly to prevent air leakage during Frenzel or mouthfill techniques.
If the pressure causes discomfort, you can customize the pad for better comfort (instructions below).
Pad Customization Guide
-
Remove the original pad attached to the noseclip.
-
Cut a piece of 3mm or 5mm neoprene into the same pad shape. Choose neoprene with nylon fabric backing to increase friction and stability on the nose.
-
Use yellow rubber adhesive (e.g., Pig Bond, OKONG Bond) to attach the new neoprene pads.
-
Note: Neoprene compresses quickly with use. Replace pads regularly for consistent performance.
Remove the original pad attached to the noseclip.
Cut a piece of 3mm or 5mm neoprene into the same pad shape. Choose neoprene with nylon fabric backing to increase friction and stability on the nose.
Use yellow rubber adhesive (e.g., Pig Bond, OKONG Bond) to attach the new neoprene pads.
Note: Neoprene compresses quickly with use. Replace pads regularly for consistent performance.
Wearing Angle for Minimal Water Resistance
The Merman Noseclip N1 is designed with precision to reduce drag based on subtle angle changes.
Adjust the clip angle based on your body position in the water to maximize performance and minimize resistance.
Care & Maintenance
-
Rinse thoroughly with fresh water after every use and dry in the shade before storage.
-
When removing, use three fingers (index, middle, and thumb) as described above to minimize pad wear and prevent injury.
-
Do not pull off the clip forcefully, as this can damage your nose and wear down the pads.
Rinse thoroughly with fresh water after every use and dry in the shade before storage.
When removing, use three fingers (index, middle, and thumb) as described above to minimize pad wear and prevent injury.
Do not pull off the clip forcefully, as this can damage your nose and wear down the pads.
Precautions
-
Do not expose the product to direct sunlight for extended periods.
-
Always rinse with fresh water after using in saltwater.
-
Do not store while damp or wet.
-
Avoid excessive force when putting on or removing.
-
The material is durable but can be damaged with improper use or storage.
Do not expose the product to direct sunlight for extended periods.
Always rinse with fresh water after using in saltwater.
Do not store while damp or wet.
Avoid excessive force when putting on or removing.
The material is durable but can be damaged with improper use or storage.
Commitment to the Environment
We do not include additional packaging materials to reduce environmental impact.
This product is intended only for those who truly need it—we do not support indiscriminate distribution or sales.
For Overseas Purchase Inquiries
-
Contact: pibada6@naver.com
-
We currently accept Paypal only for international payments.
Paypal address: pibada6@naver.com
Contact: pibada6@naver.com
We currently accept Paypal only for international payments.
Paypal address: pibada6@naver.com

Company I MERMAN Business License I 114-15-81096
Mail order license l 2014-Seoul Seocho-1969 Chief privacy officer I Lim JungTaek
Owner I Lim JungTaek Tel I 070-4242-3138 E-Mail I pibada6@naver.com
Copyright © 2013 MERMAN Custom GEAR Inc. All rights reserved.